SIEMENS N141/31 - ШЛЮЗ KNX/DALI TWIN N141/31
SIEMENS N141/31 - ШЛЮЗ KNX/DALI TWIN N141/31
Производитель: SIEMENS
Код товара: N141/31
Артикул (номер для заказа): 5WG1141-1AB31
Доступность: По запросу
Код товара: N141/31
Артикул (номер для заказа): 5WG1141-1AB31
Доступность: По запросу
Цена: Под заказ
SIEMENS N141/31:
- Communication via KNX EIB with electronic ballasts (ECG) with a DALI interface
- Two (2) DALI output acc. to IEC 60929, each for communication with up to 64 DALI ballasts and at least 10 sensors
- Integrated power supply with input voltage 110...240 V AC, 50...60 Hz or 120...240 V DC for powering the gateway electronics and DALI output
- Maximum DALI output voltage of 19 V, short circuit resistant
- Incorrect voltage detection during commissioning, whether incorrect power line is connected to a DALI output
- LC display for displaying operation mode and error messages
- Pushbutton for switching between bus and direct operating mode
- One pair of push buttons for switching On/Off of all connected DALI ballasts
- One LED per DALI output for status signal of all connected luminaries in direct mode
- Configurable assignment of max. 128 DALI ECG to max. 32 DALI groups, exclusive controlled in groups (switching, dimming, set dimming value) and feedback for group status and lamp failure
- Configurable behaviour for bus failure (stand-alone mode)
- Control (switching, dimming, set dimming value) of all connected luminaries together in broad-cast mode
- Status signal and display of lamp and ECG failure per group and per DALI device
- Possibility to reintegrate defective DALI ECG without software
- One or two level timer
- Integrated scene control for up to 32 scenes
- 16 integrated 2-level-controller for brightness control
- Assignment of DALI ECG to groups and test option for ECG, groups and scenes via ETS during commissioning
- Assignment of DALI sensors and test option of sensors via ETS during commissioning
- Integrated bus coupling unit with only half a standard bus load, bus connection via bus terminal
- Mounting on DIN rail EN 60715-TH35-7.5
Технические характеристики | |
Ширина в единицах DIN | 4 WM |